Ask Experts Questions for FREE Help !
Ask
    bigal82461's Avatar
    bigal82461 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2006, 08:52 AM
    Oil blowing out Breather Tube
    I have a Craftsman push lawn mower with a 5.5 hp engine. This spring it started blowing oil out of the breather tube. What can cause this? What do I need to check?
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Jun 6, 2006, 04:38 PM
    What brand engine? Its either a faulty breather... the engine is too full of oil or there's gas in the oil.
    ruthandron's Avatar
    ruthandron Posts: 1, Reputation: 1
    New Member
    		  
    #3

    May 10, 2011, 05:31 PM
    Craftman lawn tractor, blowing oil out of breather. And smoking like hell out of exhaustand it dies.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    May 10, 2011, 05:59 PM

    Ruth, you should really start your own new post with this issue. Click on ASK YOUR QUESTION and start a new one. I think both of you should drain your crank and start with fresh oil up to the fill line only. Inspect the oil for separation whicj may indicate gas is mixing with the oil. This could be caused by a sticking needle valve in the carb.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman blowing oil out breather tube [ 4 Answers ]

Craftsman 6.0 HP Self propelled/Mulcher lawnmower. Model# 517.372500 After starting and cuting a couple of strips... oil starts to blow out the breather tube, white smoke starts to come out the other side of the mower, so I stop and reload oil. What is the problem and should I start looking for...

Oil blowing from valve air tube [ 3 Answers ]

Hi, I have a 16hp briggs& srtatton twin cylinder engine with magnetron ignition, its an 1980 model. Got the mower started after wiring problems sloved and now it is blowing oil out the vent tube that goes from the valve vent area to the carbrator breather housing. It runs good and does not miss at...

What tube steps look and work best [ 2 Answers ]

I want to put tube steps (not running boards) on my 2006 Toyota Tacoma crew cqb pre-runner, but don't want to spend that kind of money sight unseen. I've pretty well decided on full length black (probaby power coated). I'd like to hear from y'all on which brand looks best, stands up to daily use,...

Knob and Tube tie-in [ 13 Answers ]

I apologize if I missed this info elsewhere. I have an 80 YO bungelow with seemingly healthy knob and tube wiring. The house has a combination of old and new wiring depending on when past work was done. My question is what is the safest, code friendly or preferred way to mate the old K&T to new...

View more questions Search