Ask Experts Questions for FREE Help !
Ask
    jbent0825's Avatar
    jbent0825 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2009, 06:24 PM
    Murray Riding Mower Transmission
    How do I tell when the mower will not go in gear if it's the Transmission or another problem, when it quit working I found the belt was off, I put the belt back on it still doesn't work. Murray 10.5hp 30in cut model # 309008x92A.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 5, 2009, 08:12 PM
    Hi,
    Attached is the parts picture of the belt and drive system. You did not happen to take on or both rear wheels while working on the belt. They are anchored ot the axles by keys. No key and the axle spins inside the wheel.
    Peace,
    Clarke
    Attached Images
     
    jbent0825's Avatar
    jbent0825 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 6, 2009, 07:15 PM
    No Clark I did not take off either back wheel nor did I have them off the ground Thanks for diagram.
    jbent0825's Avatar
    jbent0825 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Aug 6, 2009, 07:20 PM
    Quote Originally Posted by crigby View Post
    Hi,
    Attached is the parts picture of the belt and drive system. You did not happen to take on or both rear wheels while working on the belt. They are anchored ot the axles by keys. No key and the axle spins inside the wheel.
    Peace,
    Clarke
    No I did not remove the back wheels or have them off the ground thanks for the diagram though.
    Jerry
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray 12hp Riding Mower Transmission Won't Engage [ 6 Answers ]

I have a Murray / Tecumseh 12hp ovxl120-202046d that suddenly is no longer engaging in any gear. Also, the brake no longer appears to be working. I can put the mower in gear, engage the parking brake and the mower will roll as if nothing is engaged. The mower will start properly, I can engage...

Murray Riding mower [ 5 Answers ]

Murray select wide body. I need a electrical system diagram. Someone before I got it put an 18 twin on it .It came out with a 16.5 on it :confused:

Murray riding mower [ 4 Answers ]

I have a Murray Model 42910x92a riding mower. I started it the other day and it ran for about 2 minutes then died. I tried to start it again, but the starter would not turn over; there was no "click" of the solenoid. I checked the battery, has plenty of juice. I bridged the solenoid and the...

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

AYP Riding Mower Transmission [ 1 Answers ]

Hi; I have 42" deck AYP riding mower. Today it started jerking when putting it in gear and not wanting to go forward unless I hold the brake slightly depressed. I took the back plate off and noticed that the drive pulley was real wobbbly. Is this cause by a bad bearing or shim and is it repairable...

View more questions Search