IMy mower is mowing uneven and I changed the blades and it didn't help. A friend said it may be that the deck is missing a pin or is lose. I can't find the manual for it and Murray doesn't support it anymore. It's a 2000 Model 40508x92. Does anyone have a manual on the deck or a manual on the mower they can scan to me?

Thanks

Did you know this mower was recalled back in 2003? Here's the info. You may want to contact the number to see if they can assist with the deck problem, too.

FOR IMMEDIATE RELEASE
March 4, 2003
Release # 03-089 Murray Recall Hotline: (800) 876-1634
CPSC Consumer Hotline: (800) 638-2772
CPSC Media Contact: Yolanda Fultz-Morris, (301) 504-7066



CPSC, Murray Inc. Announce Recall of Riding Lawn Tractors
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Murray Inc. of Brentwood, Tenn. is voluntarily recalling about 270,000 riding lawn tractors. The fuel tank can crack and leak fuel, posing a burn and fire hazard to consumers.

Murray has received 101 reports of fuel tanks leaking. No injuries have been reported.

The recalled lawn tractors were sold under the MURRAY® and STANLEY® brand names and have 38-, 40-, 42-, 46-, and 52-inch cutting decks. The brand name is printed on the front or side of the lawn tractor and the model number can be found on a nameplate under the seat. The following models are included in this recall:

405014X92 405015X92 40508X92 425007X92 42515X92
42516X92 425302X92 425303X92 425614X92 42576X92
465305X92 465603X92 46581X92 425605X692 465606X692
525607X692 405002X8 425003X8 425008X8 425009X8
42544X8 38560X181 42583X6 465616X6 40541
465617 40541X99 425611X99 465612X99 465615X99
465622X99 425003X71 465619X71 465620X71


Retail and hardware stores, including Wal-Mart and Home Depot, sold the lawn tractors nationwide from November 2000 through January 2003 for between $800 and $1,500.

Consumers should stop using these lawn tractors immediately and contact the nearest Murray Service Dealer for a free replacement fuel tank. For more information, consumers should contact Murray at (800) 876-1634 between 8 a.m. and 5 p.m. CT Monday through Friday or visit the company's web site at Murray, Inc.

Yes I knew about the recall. Do you know anything about getting a manual for this mower? It was purchased back in 2000.

Could Also Be The Bearings In The Spindles Worn Out.

An idea -- Can't help with the original manual. Would seeing a diagram of the mower help? Sears sold Murray products, and their Repair Service Centers have microfilm and computers with schematics. Go to Sears.com. Top of the page is Customer Service. Then Product Repair Services. Then Locate a Repair Service Center. You can call them with your Murray Serial Number and they can tell you if they can help. Like I said, it was just a thought.

I have the manual... let me know where to send scan.

If you still have the scan of the manual and could send it to [email protected], I would greatly appreciate it. Thanks.

I would also like a copy of the manual. Please post. Thank you very much.

I would also like a copy of this manual if you could send it to me at [email protected]

I was wondering if you still had that manual if so I would really like a copy it would help out a lot... [email protected]

I would love to have a copy of this manual if it is still available.

Please send a copy of the manual to [email protected]. Thank u.

Can you send a copy to [email protected]

http://www.outdoordistributors.com/pdf/Murray/MURRAY-MODEL-40508X92A-LAWN-TRACTOR-(2000)-PARTS-LIST.pdf
It's not a manual, but it is an exploded parts list diagram, so it shows how everything goes together and what might be missing. For uneven cutting, you probably just need to adjust the deck. There's a deck leveling notch on the deck height adjustment, pull back the tab covering it where the lever catches the notches, place it to that lowest setting, unscrew the two large wingnuts on either side of the deck, pushe the deck down so it touches evenly all the way around. Now tighten the two black wingnuts, raise the deck, and it should be level.

I hope your still around... Can I get a copy to [email protected]...

Has anyone had any luck obtaining manual for this mower (40508x92)? I would love a copy

I am looking for manual for this model as well, has anyone had any luck obtaining one? I do not care if it is just a scanned copy, I just would like to have one.

I can send you a copy of the manual, but I need an address.

Jeff

Scanned copies take too long

Email address or mailing address.