Ask Experts Questions for FREE Help !
Ask
    stalin51's Avatar
    stalin51 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 11, 2010, 11:17 AM
    Murray 12.5 lawn tractor won't go
    Murray 12.5 lawn tractor won't go into any gear.
    The runs but no movement forward or reverse
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
     
    #2

    Jul 11, 2010, 05:52 PM

    The most probably cause would be a broken drive belt. You should be able to look underneath the mower and find the top belt.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Lawn Tractor Transmission [ 5 Answers ]

How can I check the transmission fluid level in a Murray Select Wide Body LT Lawn Tractor, 21 hp, 46" cut, MFG date 8.21.02. I can find NO help at the Murray website. Thanks, Phillip

My Murray 12.5 hp Lawn Tractor will not start [ 1 Answers ]

Model 405004x99, 2 year old Tractor with a Briggs & S. 12.5 hp engine has a very hard time starting. It has a clean air filter; good in-line fuel filter, clean/fresh gas; oil is new and gets spark from the plug. I have had to jump start the battery from a car and (on a different occasion) a...

Murray lawn tractor not starting [ 2 Answers ]

I have a murray lawn tractor and I hit a rock with the blade the other day and it went off. Now the tractor starts and crank but the engine doesn't turn over. It will start initially but the engine doesn't say on but for three seconds before going off again. Does anyone have any ideas, help?

Murray Lawn Tractor Dilemma [ 0 Answers ]

I am looking for an Operator's Manual for an older Murray lawn tractor. What I've found under the hood includes a 43" cut, 14.5 OHV, Model 287707, Type 022701, Code 9512054B. I've tried all kinds of websites from the Murray ones, wannabe Murray ones, to some that I can't even recall at this...

Murray lawn tractor [ 3 Answers ]

I have a murray/stanley lawn tractor that has not been used in over an year. I replaced the batteries and added fuel and managed to start it up. I did also take the safety switch off under the seat since it was corroded. However when I take my foot off the clutch to move it or lower the blades,...


View more questions Search