Ask Experts Questions for FREE Help !
Ask

MTD deck belt replacement how to

Asked Jun 20, 2006, 04:15 PM — 5 Answers
Hi. I have got a problem with the deck belt on MTD Model 14AS84AH062. I have a new replacement belt but the problem is, I did'nt see how it was before it broke.

At the end of the one side there is a thing that has a thin cable running from it, and I can't seem to understand were that has to go in order for the belt to fit there...if you can help any, I would be very grateful. I guess this is the blade brake that is in my way. Is the belt going to fit under or over the spring and brake?
Thank You So Much.

Search this Thread
Share |
5 Answers
thebriggsdude's Avatar
thebriggsdude Posts: 1,099, Reputation: 284
Ultra Member
  
#2

Jun 20, 2006, 10:12 PM
Does anybody else happen to own one? Maybe take a peek at there's..... Sorry I can't be of no more help.
Helpful
JJMMPR3's Avatar
JJMMPR3 Posts: 9, Reputation: 1
New Member
  
#3

Aug 7, 2006, 08:54 PM
Go to MTD"S website they have pictures showing belt layout
Helpful
lumper20's Avatar
lumper20 Posts: 3, Reputation: 1
New Member
  
#4

May 24, 2007, 09:28 AM
Do you have the owners manual? Is their a spring by the right rear wheel on a bracket?
Helpful
JJMMPR3's Avatar
JJMMPR3 Posts: 9, Reputation: 1
New Member
  
#5

Jun 6, 2007, 05:31 PM
No I don't
Helpful
lumper20's Avatar
lumper20 Posts: 3, Reputation: 1
New Member
  
#6

Jun 6, 2007, 06:00 PM
[quote=JJMMPR3]No I don't[/

Have you looked under the seat for the model number? I ask as you need the model number for parts as well as the fact that the some model/s have a deck spring attached to the right rear on a bracket. Do you have the spring on the lower right rear bracket? You will need model number such as the 13AM660F062 I have. It is no joy to change a belt for me. Hope yours is easier or you are much more mechanical then I am.
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Poulan/Weedeater lawnmower drive belt replacement [ 1 Answers ]

I need to replace the drive belt on my Poulan/Weedeater lawnmower. Does the cutting blade and engine have to be removed to put on a new belt? I would like to see a diagram if one is available.

Problem with MTD deck [ 14 Answers ]

I removed my deck on my Yard Machine 600 series 42 inch deck. I rebuilt the spindles and sharpened the blades, but when I remounted the deck, I had a problem with everything lining up correctly. If I hook everything up, the chute side of the deck hits the rear tire. It looks like something got...

Belt replacement problem [ 2 Answers ]

I finally got my deck straightened out but the replacement belt I got from ACE hardware seems too long (original # 754-0371A). They gave me a belt numbered 954-0371A and told me it was the same belt. Now I have to drop the deck to change the new belt out with the correct one. My question is did...

Deck Stains [ 4 Answers ]

Hi Folks can any one point me in the right direction in choosing a good deck stain... Some thing that will. LAST...Thanks much...

View more Tools & Power Equipment questions Search