 | |
| Browse | Ask | Answer | Search | Join/Login | |
Low pressure in Husky Power Washer 1759 psi
Asked May 26, 2011, 11:18 AM
—
1 Answer Have done every check to determine the cause of the water not coming from the gun but tocheck the pump seal. The website advisory suggests opening the front to check the pump.Also in addition to the gun not putting out any water there appears to be water leak underneath the machine coming from the water inlet and God knows where. Any advice to correct this will be appreciated. Wilhelm |
| ||||
| There is a pressure relief seal that often goes out on the lower end units, it will stop the unit from buidling up pressure. But is no water at all coming out of the gun, or just water with no pressure ? Also take gun off the hose, and see if it could be a gun issue. Check the intake ( where the water goes in) most have a screen and if clogged it may be a issue. | ||||
| |
| Thread Tools | Search this Thread |
Add your answer here.
Check out some similar questions!
My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged? Vic
My husky 1750 power washer won't start. The G F I plug lights up red when you turn on the power the washer won't start and the plug doesn't trip. The washer was working fine just quit like it has no power.
How do I use two tanks?
This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...
What kind of oil does the pump take and how much; are there rebuild kits for this pump? Mdf
View more Tools & Power Equipment questions Search
