Ask Experts Questions for FREE Help !
Ask
    willygeek's Avatar
    willygeek Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2011, 09:10 PM
    John deere l120 mower
    Hi Folk,

    My mower as emitting a very nasty sound from the drive shaft bearing for the blade electric clutch. Can anyone point me in the right direction on repairing this.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 5, 2011, 10:14 AM
    Hi,
    Unfortunately replacement is the usual repair. The two idlers on the drive belt can get very noisy if the bearing(s) go bad. Some course of action.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere mower L120 Trouble mower deck will not engage. [ 2 Answers ]

I have a John Deere L120 mower. The mower deck will not engage but the switch seems good. No power appears to be at the clutch on the mower deck.

Problems with John Deere L120 mower [ 17 Answers ]

My John Deere L120 mower has a problem going up embankments or even slight hills. I have replaced both mower belt and drive belt and the two plastic pulleys. It still "won't hardly pull itself" up a grade. Is the problem in the rear end or is there an adjustment on the differential?

John Deere L120 - engaging mower deck stall tractor [ 1 Answers ]

When I engage the mower deck on my JD L120, this one is from a JD not Lowe's or HD, the tractor stalls. Manually pulling on the belts I am able to turn the blades. Tractor is 3 years old and used for residential moving.

View more questions Search