Ask Experts Questions for FREE Help !
Ask
    cchanson's Avatar
    cchanson Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 14, 2008, 09:39 AM
    Husky powerwasher won't build up pressure
    Powerwasher runs, good stream of water but will not build up high pressure. What to do?
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #2

    Jun 14, 2008, 09:50 AM
    There will always be a stream of water unless there is a blockage, just from the water going in. Does the pump have a place to check the oil, see if it is good, ( not white) white shows a seal leak. Also is there water coming out of any other area, they have a pressure relief valve that if goes will not allow pressure till replaced. Also the unloader can be bad.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky powerwasher 1750 [ 13 Answers ]

I have a Husky powerwasher 1750 and when I try to use it, water quirts out of the wand... do I just need to replace the wand and the hose? I am mechanically challenged.

Temporary Pressure build up in home [ 5 Answers ]

Why does my water pressure build up after I turn the faucet off. I have about 2 seconds of high water pressure when I first turn on a faucet, any faucet in my house. This just started happening yesterday. After the 2 second surge, the water pressure returns to the normal level. I am on city water...

Low Water Pressure with SLow Build [ 5 Answers ]

Ok, I am hoping someone would please help me figure this one out. My problem lies with low pressure right now. Here's the background. I have a 150' well with a 2 wire 230v 3/4hp submerssible pump. The pipe going all the way down is just one piece. This of corse agrivated me considering it's going...

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...


View more questions Search