Machine is start and work few minutes that also star stop again and again.
Then it stop completely few minutes. Then when you off and on the switch same way it works
Add your answer here.
Check out some similar questions!
Picture of inside parts of a water gun 1750 psi husky power washer [ 1 Answers ]
I have a 1750 PSI Husky Power Washer and took apart the water gun and I'm having difficulty putting the inside parts of the water gun back. Is there any pictures or does anyone know were the springs and a white plastic piece go?
Husky power washer 1750 psi troubleshoot [ 4 Answers ]
My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged? Vic
Husky power washer 1750 psi won't start? [ 1 Answers ]
My husky 1750 power washer won't start. The G F I plug lights up red when you turn on the power the washer won't start and the plug doesn't trip. The washer was working fine just quit like it has no power.
Husky power washer 1750 problems [ 1 Answers ]
My Husky power washer 1750 motor will not shut off. Motor runs continuously even after squeezing handle. I have not pressure with high pressure nozzle; however, the variable nozzle seems to have better pressure. Help!! Thanks, Melissa
Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]
This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...
View more questions Search