Ask Experts Questions for FREE Help !
Ask
    f250collum's Avatar
    f250collum Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2010, 07:41 AM
    Husky power washer 1750 psi won't start?
    My husky 1750 power washer won't start. The G F I plug lights up red when you turn on the power the washer won't start and the plug doesn't trip. The washer was working fine just quit like it has no power.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 7, 2010, 11:35 AM

    Hi,
    A dedicated site exists for this Home Depot product at:
    Husky Home Depot Power washers, Home Depot Husky Powerwasher Accessories, Parts for Husky Powerwasher
    Manuals, specs, etc. are available. You can also leave a message. Personal experience with this brand has been that the GFCI can seem good but be bad.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky power washer 1750 problems [ 4 Answers ]

My Husky power washer 1750 motor will not shut off. Motor runs continuously even after squeezing handle. I have not pressure with high pressure nozzle; however, the variable nozzle seems to have better pressure. Help!! Thanks, Melissa

Husky power washer 1750 psi troubleshoot [ 4 Answers ]

My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged? Vic

Husky power washer [ 1 Answers ]

The first time I used the Turbo Nozzle W/Lance the end blew off. The only parts I could Find were the orange housing,a black round plastic defuser and the brass and rubber Nozzle. When I put it back togeather it is loose,like there is a part missing but there are Know pictures showing the...

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...

Husky Power Washer [ 1 Answers ]

Newly purchased replacement sprayer wand will not insert far enough to allow a twist and lock into place.

View more questions Search