Ask Experts Questions for FREE Help !
Ask
    richvic's Avatar
    richvic Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2010, 09:40 AM
    Husky power washer 1750 psi troubleshoot
    My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged?
    Vic
    richvic's Avatar
    richvic Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 13, 2010, 09:43 AM

    How can I stop the problem of the washer cycling on and off every 40 seconds?
    customerservice's Avatar
    customerservice Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 14, 2010, 09:48 AM

    There can be multiple reasons the unit is cycling on and off. Are you using a extension cord? Is the unit plugged into a dedicated 15amp outlet? Does the unit cycle with both nozzles or just one?
    With the nozzle disconnected from the gun water on and the unit on does the unit cycle on and off? How long is your garden hose?
    customerservice's Avatar
    customerservice Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jun 14, 2010, 01:07 PM
    If the troubleshooting listed by customerservice does not solve your issue, please contact us at 847-348-1520 or by emailing [email protected]

    Thank you,
    Husky Power Washer Customer Care Team
    powerwashergirl's Avatar
    powerwashergirl Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Oct 24, 2011, 01:34 PM
    My power washer comes on, but there is no water in the wand. It hasn't been used for a year and was only used for one power wash in the past. Help please!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky powerwasher 1750 [ 13 Answers ]

I have a Husky powerwasher 1750 and when I try to use it, water quirts out of the wand... do I just need to replace the wand and the hose? I am mechanically challenged.

Husky 1750 powerwasher [ 1 Answers ]

Have a husky power washer that has little pressure. Tried different wands so that's not it.

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...

View more questions Search