Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs and stratton carburetor floods out spark plug
[ 10 Answers ]
I have a lincoln power arc 4000 welder generator with a Briggs and Stratton engine, the problem I am having is that it will not start? When I check the spark plug it is always wet with gas. When I spray carb cleaner in air filter it will run for a couple seconds and then die back out. I have taken...
Still trying to work w/ the 17hp briggs & Stratton lawn mower.
[ 3 Answers ]
Went through and cleaned the coil up and the carb to just to be safe. Now have spark but it's not much and when tried to start it back fires through the carb. Need more great suggestions!
Briggs Vanguard 16hp Model 303777 Carburetor
[ 4 Answers ]
Hi, I need help to answer a puzzling question. I was rebuilding an old snapper 4216 with a 16hp vanguard engine. I was able to get the carbs clean out and engine started. The puzzling question is: On the Vanguard 16hp caburetor, there are two connections for fuel. One is the 1/4" regular fuel...
Briggs and Stratton 16.5 hp
[ 3 Answers ]
My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I... View more questions Search
|