Ask Experts Questions for FREE Help !
Ask
    tom aceves's Avatar
    tom aceves Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2010, 10:40 AM
    Have a john deere L100 no start
    John deere L100,NO START,took off starterand had it checked and its fine. I HAVE 12 VOLTS AT THE BATTERYand 12 volts going into the senolid but no volt coming out of the other side of the senolid and no volts at the starter.CAN I jump the starter senolid like the old FORDS or will it short the starter system out.
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #2

    Jan 27, 2010, 06:15 PM

    Hi! tom aceves, welcome to AMHD :)

    You can, but it's difficult to do, and not safe. Sounds like you just have a bad solenoid or a blown fusible link

    Go here for possible reasons:manuals.deere.com LT100

    Scroll down left side menu, almost to bottom to troubleshooting. Click on electrical, see result to right.

    Save manual for later reference :)

    This page for more:
    deere.com.PublicationsSearch

    K
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Jan 28, 2010, 01:49 PM

    Hi.
    Deere's commonly use a two circuit path. The trigger for the solenoid gets 12 V and there is a ground that must be viable to complete the circuit. This can be checked with jumpers to trigger the solenoid to check the high current circuit that goes from the battery to the starter.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

L100 john deere mower [ 3 Answers ]

Checked battery terminals and charge of battery... mower was fine last week when parked now it won't start, also checked 20 amp fuse... are there any other fuses?

John Deere L100 mower [ 5 Answers ]

Hi my john deere l100 will not pick up the grass clippings, we just had it services last year before winter, when the tech was here it worked just fine. Now it will not pick up the clippings

John Deere L100 just stopped [ 1 Answers ]

Hello everyone, I have an L100 that I take care of very well. I just put a new set of blades on for the third season and was out mowing today. After mowing, I was on my way to wash it down and put it away and it just stopped. It won't turn over anymore. The starter works just fine and the engine...

L100 John Deere leaking oil [ 3 Answers ]

I have a L100 John Deere that is leaking oil.. the oil is milky looking.. tractor's only a year old or so.. what can this be? Is there any way I can fix this myself? :confused:

View more questions Search