Ask Experts Questions for FREE Help !
Ask
    screen porch's Avatar
    screen porch Posts: 10, Reputation: 1
    New Member
     
    #1

    Apr 16, 2010, 06:11 PM
    I have craftsman Sears belt sander, model #103.0803 and I need parts
    I have a Sears Craftsmen belt disk sander model #103.0803. I can no longer get parts from Sears because it is too old. I need an adjustable table for the disc sander and the brass bushing that goes on the end of one of the rollers. Can someone help me. I think it was bought in the 1940's or 50's

    Thank you
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Apr 16, 2010, 06:37 PM

    Hi,
    Since you have the model number, go to http://www.searspartsdirect.com/ and look up the parts you need.
    Peace,
    Clarke
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Apr 16, 2010, 06:47 PM

    Bushings may be standard. Two sources of standard machine parts are Small Parts, Inc. and its Customers Working Together and stock drive products.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Apr 19, 2010, 10:11 AM

    Hi,
    After less-than-proper form of reply, I ought to let you "wallow" in it. However, you machine was made by King Seeley and could also have had the Dunlap label. See:
    OWWM - King-Seeley Corp. - History
    Peace,
    Clarke
    PS Try this for pictures
    http://www.owwm.com/photoindex/detail.aspx?id=9446
    And
    http://www.owwm.com/photoindex/detail.aspx?id=9071
    And
    http://www.owwm.com/photoindex/detail.aspx?id=8870
    And
    http://www.owwm.com/photoindex/detail.aspx?id=6864
    And
    http://www.owwm.com/photoindex/detail.aspx?id=6222

Not your question? Ask your question View similar questions

 

Check out some similar questions!

How do I replace my mower deck belt for a 38 inch cut sears craftsman lawn tractor [ 3 Answers ]

How do I replace a mower deck belt on my sears craftsman lawn tractor model # 917.254940

JCP Belt Sander Parts [ 1 Answers ]

I have a JCPenney 3x21 belt sander, model # 2110C. I would like to tune it up and find some replacement parts for it. New front wheel, new motor brushes, new cork pad and plate etc. It looks very much like a Porter Cable as far as parts design.

Sears/Craftsman V-Belt applications [ 5 Answers ]

I was given an assortment of new, in the package V-Belts for Sears/Craftsman tractors. Is there a reference available some place to tell what tractors these belts will fit? They have the part #'s on them but the Sears site has nothing on them that I can find. Bonnie


View more questions Search