I have a Sears Craftsmen belt disk sander model #103.0803. I can no longer get parts from Sears because it is too old. I need an adjustable table for the disc sander and the brass bushing that goes on the end of one of the rollers. Can someone help me. I think it was bought in the 1940's or 50's

Thank you

Hi,
Since you have the model number, go to http://www.searspartsdirect.com/ and look up the parts you need.
Peace,
Clarke

Bushings may be standard. Two sources of standard machine parts are Small Parts, Inc. and its Customers Working Together and stock drive products.

Hi,
After less-than-proper form of reply, I ought to let you "wallow" in it. However, you machine was made by King Seeley and could also have had the Dunlap label. See:
OWWM - King-Seeley Corp. - History
Peace,
Clarke
PS Try this for pictures
http://www.owwm.com/photoindex/detail.aspx?id=9446
And
http://www.owwm.com/photoindex/detail.aspx?id=9071
And
http://www.owwm.com/photoindex/detail.aspx?id=8870
And
http://www.owwm.com/photoindex/detail.aspx?id=6864
And
http://www.owwm.com/photoindex/detail.aspx?id=6222