 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I bought a used portable generator on craigslist for $150.. The owner assured me it worked fine. I plug in the leaf blower I was going to use and it ran so I figured it worked OK. I tried it out today and got smoke from the blower within about 20 minutes. The power cord plastic is melted and I...
I have a York Two-Stage Deluxe Diamond (PDU) furnace that I have recently wired to a 6 CKT transfer switch (Reliance Controls) to use with my Coleman 6250 (5000watt) gas generator. All my ckts. Work well with the generator connected, except the furnace. I switched ckts on the transfer switch-no...
Hello, My problem is this,I was given a new portable generator by my father-in-law.He bought a new generator from Max tool.com and it turned out to be no good (the one he gave me). I set up his generator to backfeed his service(residential application) in times for when the power goes...
I recently purchased a 6750 watt generator when our power was out for 3 days. It worked everything well except for the gas furnace. The furnace initiated and then gave an error code related to the voltage. When measuring the voltage across the generator I get about 140v but also can measure 50v...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
