Gas Leaf Blower

jodoo · #1 May 8, 2007, 01:56 PM

I have a McCulloch 32cc Gas Blower.When I put the choke on it starts and then when I put it on run it dies out.

newaukumdon · May 8, 2007, 07:59 PM

There should be a fuel filter in the tank that you can clean. If that fails find the carb adjustments marked "H" And "L" Turn the H out .4 turns.

Don

RichardBondMan · May 8, 2007, 08:47 PM

Make sure after you first start the blower, that you turn the choke off, then place the otther control in the run position. The choke is no longer needed once the machine starts.

jodoo · May 10, 2007, 08:13 PM

Thankyou for the tip Newaukumdon.There are only two red plastic screws and they only turn a 1/4 each.

newaukumdon · May 10, 2007, 08:55 PM

They WILL move! you just have to convince them. Usually the red is a cover over the screw, they act as stops to limit your adjustment but with a carb that may be a little less than perfect you need to be persuasive. Pop it off.

Don



At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to: Get free answers from experts in any of our 300+ topics. Accept money for answers that you provide. Communicate privately with other members (PM). See fewer ads. Sign Up!