 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Featherlite Weedeater
Hi:I wonder could someone tell me the proper procedure how to install the fuelline and filter inside the fuel tank on my Featherlite Weedeater? The old fuelline is cracked in several places and need to be replaced.It's the fuelline inside the fueltank.really appreciate it. Thanks Slade.
|
||||
|
||||
|
Pull the old out, cut the very end of it (the one for the filter) and poke it through the hole, pull it out the gas fill with a pair of needle noses and put the filter on. Poke it back in, then the return line just pokes in, be sure you remember where the lines go. Though if you don't, you can try it one way, and if it doesn't prime, switch them.
|
||||
|
||||
|
I recommend use of yellow Tygon Oil and Fuel line, instead of vinyl tubing. It's a superior product and will stay flexible for years. You can obtain it from the following very nice people: http://www.pspmfg.com/FuelLine.html
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a WeedEater FeatherLite gas trimmer and last weekend it just stopped working as I it was in use. I tried to start it up and the pull string won't move an inch. Any ideas as to how to fix this? Thanks
Hello all I have a Weedeater Featherlite Plus and has been a good tool to me. I have a problem, though. Lately, when I crank the weedeater up and place the lever from half choke to full choke, the weedeater goes from its usual roar, to a hum, even when I push the throttle down all the way, and...
My mother has this weedeater and wanting to do something nice for her I was going to us it and weed eat around her place. The thing is this doesn't look like the weedeaters I'm used to I can't find out how to get the bloody line in. My mom not knowing either. I read about it being bump and go,...
My trimmer only works if I hold it so that the fuel is up to the top. It appears that a tube should be in the tank to feed the fuel to the engine when the tank is low. What part or parts will I need to fix this and where can I get them? Thanks!
I want to change the head. I can't find my manual. I want to put the plastic blades on it. I don't see any bolts or anything to take off. Can someone please help me.
View more questions Search
|
