Ask Experts Questions for FREE Help !
Ask
    drvcads's Avatar
    drvcads Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2009, 06:29 PM
    Engine switch V twin briggs for Briggs intek ohc
    I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1

    Thank you, this is my first post.

    drvcads
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 7, 2009, 08:48 AM

    It should be possible but I'd check the engine mount bolt pattern. Its more of a concern than the wiring which should be pretty much identical.
    lawntractorkid's Avatar
    lawntractorkid Posts: 22, Reputation: 2
    New Member
    		  
    #3

    Apr 7, 2009, 12:59 PM

    The wiring should be pretty much the same.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and stratton 14.5 I/C intek [ 1 Answers ]

I need the compression spec for the Briggs 14.5 intek engine. Thank You Kindly Louis D'Amico

Valve adjustment intek 20 hp briggs [ 1 Answers ]

Valve adjustment instructions for a v-twin briggs intek engine. Popping out of carb and impossible to start, runs good after starting. Very frustrating and undependable. Good compression new plugs, coils, filter but after reading I believe the compression release related to valve adjustment may...

Craftsman lawn tractor 19.5 Briggs twin engine won't start. [ 1 Answers ]

Hello, Last time I used this mower was about 3 months ago, ran it out of gas and left It (covered). Tried to start it yesterday after putting in about 3 gallons of new gas And it will crank fine but not start.. I took off the air cleaner and trickled in a bit of gas And it started to run and...

Briggs & Stratton 25 HP Intek Engine "Racing" [ 2 Answers ]

My 25 HP Intek Twin Model 445777 Type 0134 engine with 47 hours, clean gas, oil and filters, started "racing," after one hour of mowing this week, blowing smoke. I've mowed three times this season; over one hour each with no problem. Choke now runs in "reverse," meaning that I have to push it all...

16.5 I/c Briggs Twin engine problem [ 10 Answers ]

After rebuilding the deck over the last two months, now my Yard Machine 600 series tractor will not run properly. The engine will rev and die repeatedly when you try to cut with it. The carb was rebuilt last year and it has new fuel lines and filter. Is this an adjustment problem or is the carb...

View more questions Search