Ask Experts Questions for FREE Help !
Ask
    ricklm's Avatar
    ricklm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2010, 07:19 PM
    Dlt 3000 craftsman blades
    Why am I having to twist my motor around by hand, off a compression stroke, before it will start?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Aug 6, 2010, 07:44 PM

    Guess because I don't know model. Check valve clearance.
    hrols64's Avatar
    hrols64 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 26, 2011, 07:18 PM
    Mine was doing this and had a loose cable
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    May 26, 2011, 07:55 PM

    Which engine does it have? Read this related link https://www.askmehelpdesk.com/tools-...lve-89671.html
    j_kmonroe@yahoo's Avatar
    j_kmonroe@yahoo Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Aug 4, 2011, 03:21 PM
    Battery is bad
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    Aug 4, 2011, 04:50 PM

    This post is almost a year old so the poster is long gone. Monroe is new but needs to limit answers to known facts and not wild guessed like a dead battery. Many poster would give you a negative mark for guessing.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #7

    Aug 4, 2011, 04:54 PM

    Guessing is the motherload of screw ups..
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman dlt 3000 riding mower [ 1 Answers ]

Have craftsman dlt 3000 riding mower. Main problem is when I press in the clutch and start the engine it dies when I put it in gear and release the clutch. Also dies if I try to engage the blades. Hope you can help. KC

Blades Not Engaging- Craftsman DLT 3000 [ 1 Answers ]

My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...

Blades Not Engaging- Craftsman DLT 3000 [ 1 Answers ]

My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...

Craftman DLT 3000 [ 1 Answers ]

Push in the brake to start it will start but when you let the brake off it stalls out

View more questions Search