Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Craftsman riding mower blows fuses (https://www.askmehelpdesk.com/showthread.php?t=368269)

  • Jun 23, 2009, 02:18 PM
    tgodbee
    Craftsman riding mower blows fuses
    Hi.
    I have a craftsman rider that is about 9yrs old and this year it keeps blowing fuses
    Every time I go to start it. Can you please help.
    Thank you.
    tgodbee
  • Jun 24, 2009, 10:44 PM
    21boat

    Aside from having an exposed hot wire being grounded and not being there to chase all the wires down, it sounds like the ignition switch itself is grounding out art the switch.

    Pull switch and inspect for melting in the back of it or a wire that looks like it got hot going into it..
  • Jul 19, 2009, 10:14 AM
    mekos

    Ok great I will give it a look, I should have added that it takes 15 to 20 seconds to blow this fuse.
  • Jul 19, 2009, 10:15 AM
    mekos
    :)
    Quote:

    Originally Posted by 21boat View Post
    Aside from having an exposed hot wire being grounded and not being there to chase all the wires down, it sounds like the ignition switch itself is grounding out art the switch.

    Pull switch and inspect for melting in the back of it or a wire that looks like it got hot going into it..


    Very good!!
  • Jul 19, 2009, 10:42 AM
    mekos

    Check the cigeratte lighter, it may be shorting to ground.
  • Aug 11, 2009, 02:15 PM
    lisa1968

    I now have same troubles, just put new ignition switch in and battery, now tis blowing fuses, switch appears to be in all the way.. what was your problem maybe you can help me
  • Aug 13, 2009, 09:50 PM
    crigby

    Hi,
    It is a short in the positive side of the battery connections on the other side of the fuse than the battery is on.
    To illustrate, a short before it reaches the fuse would have no effect on it. It has to be after in the circuit or it would have no result.
    Model numbers are always a help since I read schematics (and many other things) just the same as others read novels (which I have little time for.)
    Peace,
    Clarke
  • Aug 14, 2009, 04:17 PM
    lisa1968

    Took to shop, they checked it, no problem found in any wires as of now, yet put a 30?amp fuse in it. Gone run it tomorrow, will email u model and all tomorrow. They found nothing wrong with it, but me and you will see... thks lisa
  • Jun 1, 2011, 03:53 PM
    jdc175
    Same prob but mine wd blow as soon as I turn the key on. So I disconnected the regulator and put a 15 amp fuse in. voltage seem OK but eventually I will need to charge. I have a bat tender and quick disconnect.
  • Mar 11, 2012, 03:15 PM
    Alettae613
    We have a Sears Craftsman riding Lawn mower and I need to know where the fuse is
  • Mar 28, 2012, 02:39 PM
    milesm
    On Craftsman riding mower open the front cover and on the right hand side of the inside of the dash the fuse is tucked under a little cover about where the top and side of the dash meet.

  • All times are GMT -7. The time now is 01:34 PM.