Ask Experts Questions for FREE Help !
Ask

craftsman gt 3000 problems

Asked Jul 19, 2012, 10:33 AM — 3 Answers
mower deck runs for 5 or 10 minutes then just quits. Engine runs fine but the mower blades stop running. let it sit for 20 minutes and the mower works for another 5-10 minutes then quits. all the while the engine runs great. Any thoughts please& thanks!

Search this Thread
Share |
3 Answers
crigby's Avatar
crigby Posts: 3,747, Reputation: 466
Outdoor Power Equipment Expert
  
#2

Jul 20, 2012, 07:21 PM


Check the airgap on the electric PTO clutch. There sould be three oval windows in the upper housing through which you can insert a feeler gauge. Try for 0.010" to 0.012"( the same all the way around.)
Peace,
Clarke
Helpful
doitz's Avatar
doitz Posts: 2, Reputation: 1
New Member
  
#3

Jul 23, 2012, 05:26 AM
Quote:
Originally Posted by crigby View Post
Check the airgap on the electric PTO clutch. There sould be three oval windows in the upper housing through which you can insert a feeler gauge. Try for 0.010" to 0.012"( the same all the way around.)
Peace,
Clarke
thanks Clarke! looked at it afound the 3 windows but inserting the feeler gauge looks tricky to be able to know exact placement of the gauge? where is the adjusting screw or bolt located pelase? would the manual show this procedure? many thanks,
Helpful
crigby's Avatar
crigby Posts: 3,747, Reputation: 466
Outdoor Power Equipment Expert
  
#4

Aug 2, 2012, 02:54 PM


Hi,
Should be three nuts near the holes(have springs on them.)
Peace,
Clarke
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Dlt 3000 craftsman blades [ 6 Answers ]

Why am I having to twist my motor around by hand, off of a compression stroke, before it will start?

Craftsman dlt 3000 riding mower [ 1 Answers ]

Have craftsman dlt 3000 riding mower. Main problem is when I press in the clutch and start the engine it dies when I put it in gear and release the clutch. Also dies if I try to engage the blades. Hope you can help. KC

Blades Not Engaging- Craftsman DLT 3000 [ 1 Answers ]

My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...

Blades Not Engaging- Craftsman DLT 3000 [ 1 Answers ]

My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...

View more Tools & Power Equipment questions Search