Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing MTD engine pulley
[ 3 Answers ]
I need to replace my drive belt but cannot get the pulley off, motor spins? Any suggestions? Also it is reverse thread correct? Thank You
MTD Engine Pulley replacement
[ 2 Answers ]
I've got an old ('89) MTD lawn tractor with a 12hp B&S engine, 38" cut. The engine drive pulley has come apart and needs to be replaced. I can find replacements, but my question is how does the old pulley come off? It seems like there is a nut holding it on. Normal or reverse threaded? How do I...
14.5 hp MTD lawnmower-Drive pulley
[ 1 Answers ]
I need to remove the drive pulley. I removed the nut at the bottom but the drive pulley will not come off. Do I require a pulley puller or am I missing something? Thanks
1994 Civic - Check Engine "Orange" lamp and Engine revs when idling
[ 1 Answers ]
Two questions realting to my Honda Civic ESI - 1994 model. 1) When I turn on the ignition key there is a Check Engine lamp displayed in Orange which is remaining On for progressively longer. Car not be started until this light disappears. Eventually after 3-5 seconds light turns off and engine... View more questions Search
|