chain saw

tops · #1 Apr 18, 2006, 03:53 PM

I have a 14" chain saw but haven't used it in several years. I put in gas and oil and it started right up. I changed the saw blade and added gear and sprocket oil. Now the saw smokes and drips oil. Also the blade doesn't come to a complete stop when the trigger is released. I moves at a slow pace unless I use the kick back handle. Any suggestions

thebriggsdude · Apr 18, 2006, 06:50 PM

I'm not much into chainsaws, either the brake is worn out, or its running a little too fast for it to stop, as for the oil, what ratio are you using? IF its really old a carb rebuild isn't a bad idea.

fredg · Apr 19, 2006, 06:15 AM

HI,
As a chain saw operator on many occasions, it's normal for the ones I have used to idle slowly, slowly turning the chain. It usually won't completely stop unless the Brake handle is engaged.
As for the smoking, I agree with the previous answer. You might have too much oil in your gas mixture. It is a "miracle" that it started right up after several years!



At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to: Get free answers from experts in any of our 300+ topics. Accept money for answers that you provide. Communicate privately with other members (PM). See fewer ads. Sign Up!