Ask Experts Questions for FREE Help !
Ask
    patjohnston's Avatar
    patjohnston Posts: 44, Reputation: 1
    Junior Member
     
    #1

    Apr 23, 2010, 12:29 PM
    Briggs and strattonn lawnmower engjne
    I have a mountfield lawnmower with a briggs and stratton engine. When I prime it 2 or 3 times it starts and runs perfectly for about 30 seconds then cuts out. I've cleaned the filter and spark plug, it seems like it maybe a blockage somewhere, any ideas anyone.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Apr 25, 2010, 06:36 PM

    Hi,
    I gather that this is a walk behind mower since you prime. It could be a blockage in the tank or fuel line. More likely it is the inlet needle and seat if it is a float carb. That would part# 398188. If the tank mounts to the top of the tank, it is the diaphragm or pickup tube.
    Peace,
    Clarke
    patjohnston's Avatar
    patjohnston Posts: 44, Reputation: 1
    Junior Member
     
    #3

    Apr 28, 2010, 11:12 AM

    Thanks again Crig, I've got it going but it's a bit gaspy and slow any ideas how to speed it up a bit ?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Apr 28, 2010, 01:33 PM

    Hi,
    I really would need the engine numbers above the spark plug or muffler to know which exact engine you have.
    Peace,
    Clarke
    patjohnston's Avatar
    patjohnston Posts: 44, Reputation: 1
    Junior Member
     
    #5

    Apr 29, 2010, 06:03 AM

    Hi Clarke,
    Thanks for the trouble your taking to help buddy, this is all the info from above the spark plug.

    Model:- 10D902
    Type:- 0141 B1
    Code:- 02032754

    Being a Brit I'm guessing a muffler is what I would call an exhaust ?

    Cheers buddy !
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #6

    Apr 29, 2010, 08:17 PM
    Hi,
    I knew it was a UK problem since I know what a Mountfield is, and others , from previous experience!
    I will attach the parts breakdown (IPL) for your perusual.
    First is to remove the air cleaner and screw. The remove bolts 190 and 190A. Ease the tank and carb off the intake pipe, tilt down carefully the unhook 201 from carb without damage. Remove the 5 screws from the carb that attach itit the tank and clean 393. Consider replacing 394 before reassmebly.
    Peace,
    Clarke
    PS Need more direction, please do not hesitate!
    Attached Images
  1. File Type: pdf MS6379_A_LO[1].pdf (561.4 KB, 577 views)
  2. patjohnston's Avatar
    patjohnston Posts: 44, Reputation: 1
    Junior Member
     
    #7

    Apr 30, 2010, 05:58 AM

    Hello again,

    Clarke you are a star, I shall take great pleasure perusing that most comprehensive manual you have sent me. Thanks again bud, much appreciated sir.
    patjohnston's Avatar
    patjohnston Posts: 44, Reputation: 1
    Junior Member
     
    #8

    May 3, 2010, 10:36 AM

    Hi Clarke,

    You are the man, sisters mower running like an Indy car. Didn't replace the gasket because she was desperate for the mower, but I'm going to completely overhaul it during winter so will do then, once again thanks for all your help.

    Cheers Pal

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and Stratton lawnmower emgine [ 0 Answers ]

I have a mountfield lawnmower with a briggs and stratton engine. When I prime it 2 or 3 times it starts and runs perfectly for about 30 seconds then cuts out. I've cleaned the filter and spark plug, it seems like it maybe a blockage somewhere, any ideas anyone.

I can't start my briggs and stratton lawnmower [ 1 Answers ]

I have tried cleaning and drying the spark plug, I beat the air filter gently to clean it and it still won't start. I don't have many tools so I can't take it apart and I have useless guy friends lol. Please help because I can't figure it out..

Briggs & Stratton/ Weedeater lawnmower [ 1 Answers ]

I have a Weedeater lawnmower model 425133 with a Briggs & Stratton sprint 3.75hp motor, model 98902, type 0131 01. The pull cord on the 'easy start' starter is not retracting, so the mower won't start, or if it does retract and start it has an awful squeal. I see no way to get just to the reel to...

Starter kick back on Briggs lawnmower [ 2 Answers ]

When I pull the starter occasionally it will jerk the rope back sharply. What causes this jerk back? Is it a compression problem or a rope problem?

Lawnmower - Briggs 7 HP - no spark to plug [ 1 Answers ]

The plug is not sparking on my Briggs 7 HP lawnmower, what is wrong, what should I check?


View more questions Search