Ask Experts Questions for FREE Help !
Ask
    shorey01's Avatar
    shorey01 Posts: 6, Reputation: 2
    New Member
    		  
    #1

    Sep 17, 2007, 02:39 PM
    Briggs and Stratton Vanguard OHV Engine
    I have a new Briggs and Stratton 8000 watt generator powered by a Vanguard 15 hp overhead valve engine.Since it came from the factory it has a popping sound from the muffler as it runs. It seems as though there is a misfire. The spark plug has been changed and the spark is in spec. Service dealers can't find the problem. They say it should run smooth without the popping sound. Any advice would be helpful.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Sep 17, 2007, 06:51 PM
    Well, if it is new and the service dealer can't find the problem, are they an authorized briggs dealer? If so , stay on them and if they do not give you results, tell them to have the area rep come by and check it out. Stay on them, use your warranty. DO NOT go into the engine yourself, or remove any components, doing so could void your warranty. Carry your sales receipt in with you, and have a warranty inspection done.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 16hp vanguard [ 11 Answers ]

I have a simplicity mower (1998) with a 16hp vertical shaft vanguard v-twin engine (303777 1111-51). Yesterday, after running the mower with turbo bagger attachment (a little extra load on the engine), for about 20 minutes, I idled back the engine and it began belching large clouds of blue/white...

Briggs & Stratton 16 hp Vanguard [ 2 Answers ]

Hello all, I have a this 16 HP Vanguard motor that came on a Dosko stump grinder. My problem is that the fuel will weep into the block and fill my cylinders. It also drips out of some sort of metal intake line that has nothing attached to it. This intake does suck air as it will kill the engine if...

Briggs & Stratton Vanguard 16HP OHV No Spark? [ 3 Answers ]

Hi All, Seen several threads along this line but nothing that seems to help me. I have a Briggs & Stratton Model 303777 Vanguard (on a 1994 Snapper SR170 Rider). The engine turns over well, but will not start. I am not getting any "thump" when it turns. I am not hearing any clicking from the...

View more questions Search