Ask Experts Questions for FREE Help !
Ask
    sogalady's Avatar
    sogalady Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 18, 2009, 11:03 AM
    Belt configuration for Snapper Z1803K zero turn mower
    The blade belt came off my Snapper Z1803ZK zero turn mower and I can't figure how to put it back on. Can you help?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 20, 2009, 08:51 AM

    Hi,
    First let me say that the manuals are available online though you need different numbers. There should be a black on silver tag under the seat with a model number that is probably five digits and begins with "80..." There should also be a similar tag on the deck with its model number.
    Snapper is now owned by Briggs as is Simplicity and their manuals have been "folded" together so without those numbers, it can get difficult and time-consuming.
    I am going to assume a 48" deck beause of the horsepower, yes that "18" part of the number you gave.
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing The Belt on a Snapper Riding Mower [ 4 Answers ]

I need to know how I replace the belt on my Snapper SR1333 riding mower. I just purchased a belt and now I need to know how to change it. I thought it was a quick fix but I guess that's what I get for thinking. :)

Replace a Lawn Mower Belt for a Snapper Riding Mower [ 1 Answers ]

Hi I don't know the model number of this mower but it a snapper and its kind of little and cute looking very used and says briggs and straton on it 10 hp and 30" single blade. I bought it used and the pully is no longer used to start it, it now starts with the key turn and choke. I need to replace...

Needing Snapper # LT140H38ABV diagram of belt configuration [ 5 Answers ]

I need a diagram on how to replace a belt and guards on my Snapper LT140H38ABV riding mower. I have gotten on the internet and made many calls, to no avail. One of the quills and bearings had to be replaced and it took forever to locate and purchase/ship those parts, that now I can't remember how...

Murray mower belt configuration [ 2 Answers ]

I have a 12hp Murray mower and I can't find the belt configuration for the mower deck. Can anyone help me with either a website or the actual pattern? Need to get the leaves off the lawn before the Wife kills me! Thanks for your help.

Mower deck belt configuration [ 1 Answers ]

I have a craftsman 38" cut mower that is probably 10 years old with a 14 hp motor. I cannot figure out the configuration of the mower belt installation. Can you help? Thanks, Skip

View more questions Search