Add your answer here.
Check out some similar questions!
Fuel pump [ 1 Answers ]
Do my 95 g20 van have a fuel pump and if so where is it located
B&S 18HP INTEK Valves/Compression Release [ 1 Answers ]
Am having the same trouble as a lot of others with my 18 hp B&S Intek rider. The motor turns over 1 revolution and stops.Installed new battery and have reset the valve clearance to (.004 intake, .006 exhaust)I remember something about a gummed-up compression release causing this problem ....
Upgrading Digital Thermostat w/ Heat Pump & Gas Aux [ 4 Answers ]
Hi, I am looking for a recommendation for a new thermostat. I currently have an electric heat pump with gas backup and two-stage blower. The current thermostat is a very basic digital model ( White-Rodgers ) and is working properly, as far as I can tell. It works like this: Heating Mode:...
Problems with 16.5hp B&S Motor [ 8 Answers ]
I have a 16.5 HP B&S motor, OHV. I have replaced the ignition switch, the battery, the solenoid and the fuel soleninoid. The motor ran when shooting starting fluid in it and dies right down. I pulled the main carb jet out and cleaned it, it appeared gummed up. The mower had been running fine...
Yellow Tygon Oil and Fuel Tubing [ 1 Answers ]
I recommend use of yellow Tygon Oil and Fuel line, instead of vinyl tubing, on your 2-cycle applications. It's a superior product and will stay flexible for years. You can obtain it from the following very nice people: http://www.pspmfg.com/FuelLine.html You will be glad you tried it and you will...
View more Tools & Power Equipment questions Search