Ask Experts Questions for FREE Help !
Ask
    bureaujj's Avatar
    bureaujj Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 11, 2007, 08:41 AM
    16.5 HP briggs and stratton (model 313777) manual
    I have a 16.5 HP briggs and Stratton (model 313777) in my tractor. The connecting rod broke and punched holes in the casing. I need to rebuild the engine. Does anyone know where I could get a good book to do this? It must contain specs of the motor and maybe step by step instructions on how to take it apart and put it back together.
    Thanks!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Aug 11, 2007, 09:14 AM
    Um, you would be better off ordering yourself a "short block" and come out cheaper I believe than to try and replace the broken housings and purchase the internal parts.
    bureaujj's Avatar
    bureaujj Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 12, 2007, 12:24 PM
    I already explored that route but the short block is worth $684. I can get a new motor for $850. I had the block repaired for $120 and got the rest of the parts needed for $150. All I need is the specs to put it back together. Thanks for your response.
    Willwlw's Avatar
    Willwlw Posts: 1, Reputation: 1
    New Member
     
    #4

    Jul 22, 2012, 02:06 PM
    How do I change oil in my Briggs and Stratton 16.5 go mower?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and stratton [ 6 Answers ]

My briggs and stratton lawnmower was running great then started spluttering. Cleaned air filter changed spark plug still the same. Spark plug goes a sootie black colour in 30 secs. Also its pulsing badly with a bit of black smoke. Any help welcome ...

Briggs & Stratton 3.5hp Model 98902 [ 2 Answers ]

I have a Bolens Edger with a 3.5 Vertical Shaft Briggs which I purchased used with this problem: After priming the carb, the motor will start (it may take a couple of tries to keep it running) Once it keeps going, the engine seems to oscillate (revs up and dies down, revs up and dies down...

16.5 hp briggs and stratton [ 2 Answers ]

I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...

Briggs and Stratton 16.5 hp [ 3 Answers ]

My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I...

Briggs and Stratton 10 hp [ 1 Answers ]

Can some one help me I need to know what valve setting to set on my briggs stratton generator. Thank you for you help


View more questions Search