Ask Experts Questions for FREE Help !
Ask
    pyper's Avatar
    pyper Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2006, 06:23 PM
    14.5 hp MTD lawnmower-Drive pulley
    I need to remove the drive pulley. I removed the nut at the bottom but the drive pulley will not come off. Do I require a pulley puller or am I missing something?

    Thanks
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Jul 9, 2006, 11:42 PM
    The pulley on the engine? Guess some sort of Anti-Seize wasn't used... yeah it'll have to ve pulled, you can try heating it up some and melting some candle wax down it, then pull and see if it helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poulan/Weedeater lawnmower drive belt replacement [ 1 Answers ]

I need to replace the drive belt on my Poulan/Weedeater lawnmower. Does the cutting blade and engine have to be removed to put on a new belt? I would like to see a diagram if one is available.

Polan/weedeater lawnmower drive belt [ 10 Answers ]

Can someone help me figure out how to replace the belt on my poulan/weedeater mower?

Removing MTD engine pulley [ 3 Answers ]

I need to replace my drive belt but cannot get the pulley off, motor spins? Any suggestions? Also it is reverse thread correct? Thank You

MTD Engine Pulley replacement [ 2 Answers ]

I've got an old ('89) MTD lawn tractor with a 12hp B&S engine, 38" cut. The engine drive pulley has come apart and needs to be replaced. I can find replacements, but my question is how does the old pulley come off? It seems like there is a nut holding it on. Normal or reverse threaded? How do I...

View more questions Search