Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
20 hp Briggs and Stratton engine won't start -TroyBilt mower
[ 4 Answers ]
I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?
I can't pull the starter cord on my 10hp Briggs and Stratton Engine
[ 6 Answers ]
I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...
Briggs&Stratton engine 121602
[ 3 Answers ]
OK, Dh and I are havig a slight disgreement about the mower. It is a Murray, sold under the Scotts brand in 2000, with a briggs and stratton 6.5 hp engine number 121602. Now, a cable broke, the one from the handle that kills it when you let go, and it sat outside for a month while we got the...
Briggs 12 HP engine drags
[ 2 Answers ]
I have a B/S 12 hp 28000 series engine. Rebuilt the engine and now upon trying to start, the engine drags and won't start even on the charger. It doesn't appear to be spinning fast enough so I bench tested the starter. When it spins it sounds real rough (whining sound) Connections are tight,...
16.5 I/c Briggs Twin engine problem
[ 10 Answers ]
After rebuilding the deck over the last two months, now my Yard Machine 600 series tractor will not run properly. The engine will rev and die repeatedly when you try to cut with it. The carb was rebuilt last year and it has new fuel lines and filter. Is this an adjustment problem or is the carb... View more questions Search
|