Ask Experts Questions for FREE Help !
Ask
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #1

    May 21, 2007, 06:28 PM
    Briggs engine
    I have a briggs 23hp on my mower. Many times when I try to start,it tries but doesn't. If I turn engine bach 1/4 turn by had at fan cover it starts fine. The battery is new and fully charged. What could cause this? Thanks
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    May 22, 2007, 08:04 AM
    Correct the problem. It was loose valve. Adjusted them and all is fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs 14.5 OHV Engine only runs when choked [ 1 Answers ]

I have a 14.5 OHV Engine that will only run when fully choked. I am thinking this is a carb problem. I have taken carbs apart and cleaned them on smaller engines but the 14.5 looks a little harder. Can anyone give some tips on taking this thing apart and cleaning it. Does it sound like I am...

12 HP Briggs engine [ 2 Answers ]

I have a 12 HP briggs and stratton engine that will start when choked and then only run while between choke and full throttle position. I have cleaned carb. And checked fuel supply. Any Suggestions?

Briggs 12 HP engine drags [ 2 Answers ]

I have a B/S 12 hp 28000 series engine. Rebuilt the engine and now upon trying to start, the engine drags and won't start even on the charger. It doesn't appear to be spinning fast enough so I bench tested the starter. When it spins it sounds real rough (whining sound) Connections are tight,...

16.5 I/c Briggs Twin engine problem [ 10 Answers ]

After rebuilding the deck over the last two months, now my Yard Machine 600 series tractor will not run properly. The engine will rev and die repeatedly when you try to cut with it. The carb was rebuilt last year and it has new fuel lines and filter. Is this an adjustment problem or is the carb...

View more questions Search