Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Join pvc drain into middle of existing cast iron
[ 3 Answers ]
Hello everyone. I am planning to move the sink in my bathroom. I've already figure out (it's pretty easy) where to put the copper pipes with hot cold water. Right now I am trying to figure out the best way to do the dranage. There's a cast iron pipe about 4' in diameter, that runs from...
Cast iron drain connection
[ 4 Answers ]
Hi, we have a house built in the ealy 50's. We've torn out a small tiled shower and want to replace with a new one that doesn't leak. We have a 2" cast iron drain pipe sticking 1 1/2 inches above the house slab. What is the best way to connect a new two piece drain before we build or install new...
Installing a PVC shower drain to cast iron
[ 5 Answers ]
Hi - I was wondering if you could tell me what type of adhesive I would need to attach my PVC drain to the cast iron pipe, below the shower. I have no plumbing experience and am trying to do this myself to save some $. Thanks! :) OJ Bean
Cast iron or PVC waste/drain pipes?
[ 5 Answers ]
Hi everyone. I'm in the middle of a major remodel to my 1947 home, including adding a second story. We're trying to do everything top-notch, which leads me to the experts here. Here's my question: For the waste/drain pipes, I know we want to use cast iron in the drops between the floors (for...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|