Ask Experts Questions for FREE Help !
Ask
    lesw's Avatar
    lesw Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2017, 04:35 PM
    What breakers will a midwest panel accept?
    What breakers will a midwest panel accept?
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #2

    May 4, 2017, 06:16 PM
    https://www.brookelectrical.com/Imag..._Specsheet.pdf
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    May 4, 2017, 06:25 PM
    Not necessarily what breakers fit but what APPROVED breakers. Putting in an unapproved breaker voids the UL listing. I see panelboards with 3 or 4 different breakers. Yes, they fit but are not approved. Home Depot used to have a listing in their store that showed approved breakers, not sure if they still do. Unless the circuit breaker is marked on the panelboard as being acceptable or it is UL Classified as being acceptable, the circuit breakers have not been tested in the panelboards and should not be used. Might be better to consider a new panelboard.
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #4

    May 5, 2017, 04:13 AM
    Circuit Breakers approved or "Listed" for use in a panel are specifically listed on the panel cover door or in the manufacturers documentation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Ge breakers work in a Midwest meterloob [ 3 Answers ]

Ge breakers work in a midwest meter loop

Will GE breakers fit a midwest panel [ 1 Answers ]

Will GE breakers fit in a midwest panel. I am putting up two temporary service poles and found two used ones that are done for my power provider.

Connections for Midwest Electric 60A GFCI Spa Disconnect Panel [ 3 Answers ]

I'm installing a spa with a Midwest Electric 60A GFCI spa disconnect panel (#UG412RMW260P)between the spa and the house main service panel, but I'm confused which lugs in the disconnect box to connect the "hot" wires (Red & Black) to from my house service panel? This panel has two sets of lugs...

70 a sub panel with two 15a breakers what size breaker to feed panel [ 2 Answers ]

70 a sub panel with two 15a breakers what size breaker to feed panel

View more questions Search