Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Drilling Holes
[ 6 Answers ]
Is there a trick in marking a surface where to drill holes. Like the enclosed picture of a door knocker. Do you coat it with lipstick And press it against the door, so the drill holes line up for the screws In the right position coming from the other-side of the door?
Drilling holes in concrete slab for termite prevention
[ 0 Answers ]
My 2-storey house sits on a concrete slab. I am considering having some preventive work done for termites. The termite control companies I have contacted have suggested that they drill holes (small dia.) in a few places in the concrete slab to inject foam/prevention chemicals. I have a few...
Drilling Toilet Drain through concrete floor
[ 1 Answers ]
I am renovating my 1930 Craftsman Bungalow (small) bathroom. The toilet drain is too far away from the original wall for a modern toilet to sit without having about a 5-6 inch gap behind it. The previous owner renovated once before and built out the wall to use a modern toilet on the old toilet...
Drilling holes in floor joist
[ 5 Answers ]
Hi ,I want to move a 3" abs ventpipe in a floor space. The floor joists are 2X10 and near the supporting wall .Can I drill the joist? Do I need to use plywood or 2X10 to sister the floor joist to make up for the weakening .thanks bman55golf
Drilling holes
[ 2 Answers ]
I need to drill a4" vent hole for a water heater in side of my house to connect the venting. What is the best drill to use and any avice on problems imight run into? View more questions Search
|