Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace for 1979 camper
[ 0 Answers ]
So I am (blessed) with a suburban heater in my camper. I managed to get it to work, with the pilot lit and stayed, the burner to come on, and the fan to blow (blows with or without flame) I had to replace the thermostat because the old one was no good, but a day later the thing quit. When it calls...
Furnace troubleshoot
[ 0 Answers ]
Furnace is a Concord 80 plus. It will hesitate at start, for two times, then will kick on and operate properly. The model # is RGU80A100D14-3A. The green light on top has inter mitten flashes and other then the stagger start, works fine. Any solution would be appreciated, thank you.
Troubleshoot a Intertherm Furnace?
[ 0 Answers ]
I have an intertherm furnace. When in AC mode it will run a while and then the furnace will shut off and the outside unit will continue to run. At this time I also will have the "the flame fail light" blinking continuously about the power light. I have replaced the thermostat,wire to the furnace...
Rheem quiet 80 blinking lights.troubleshoot?
[ 1 Answers ]
We just had a Rheem quiet 80 installed and there is now a green light that blinks 3 times. What is the problem and how do I fix this.
Troubleshoot an oil furnace
[ 1 Answers ]
I have an Oil Furnace and it will not start. I hit the reset next to it and it will kik on for about 30 sec but will I get not flame. It sprays the oil. View more questions Search
|