Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling light wiring?
[ 6 Answers ]
I just purchased two ceiling lights at Home Depot and when I got them home I noticed a warning on the box that said " use supply wire rated at 90 C, most homes built before 1985 use 60 C wire". My home was built in 1971. How do I tell if my wiring is okay. I checked the wire sheathing and the...
Hampton Bay outdoor flood light (motion/optical)
[ 1 Answers ]
My HB flood lights stopped working recently, but if I turn the unit to "test", wave my hand in front of the sensor, the lights pop on. Turning it back to 1,5, or 10 minute timer delay does not work, even in the dark. Faulty opical sensor? Would that prevent the unit from operating in timer mode?
Wiring Fluorscent Light
[ 3 Answers ]
I'm having difficulty wiring a fluorescent fixture to a wall plug. This has been an ongoing battle. I changed the ballast, reworked the clips, BOUGHT a new fixture, still the same... if I get the light to come on by fiddling with the rotation of the bulb, then it won't re-light when unplugged ...
Ceiling Light Wiring
[ 2 Answers ]
Hey! I just moved into this 1 room apartment, and decided to put a ceiling light , a 2 bulb. Just to fill you in, before that, and (still) , I had accidentally found out that the switch on the wall , was connected to an outlet, so I just got a cheapo lamp and connected there so it could be...
Wiring help, one light on, the other gos off...
[ 1 Answers ]
hi, OK here's what I have... I'm trying to replace a light, now the wires that are under the light are: 3 x red 3 x black 1 x earth View more questions Search
|