Ask Experts Questions for FREE Help !
Ask
    bredin01's Avatar
    bredin01 Posts: 71, Reputation: 1
    Junior Member
    		  
    #1

    Sep 26, 2012, 08:52 AM
    Auto Repair Question
    Can some mechanic out there tell me the labor time to replace a tranny pan seal and filter on a 99 Nissan Altima? Also, is there any free laboe time guides on the internet for future similar inquiries?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 26, 2012, 09:23 AM
    Outfits, such as AllData, charge repair shops big bucks for that data. I doubt that information is available for free. I think I could drop and clean the pan and magnet, replace the filter, install a new pan gasket, and refill with ATF in 90 minutes.
    RickMN's Avatar
    RickMN Posts: 244, Reputation: 52
    Full Member
    		  
    #3

    Sep 27, 2012, 07:29 AM
    1.7 hrs. Try your public library and see if they offer online auto manuals. Otherwise, nobody is going to have that info for free.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Auto repair [ 2 Answers ]

I was at the car dealer doing the oil change today. They tell me my left and right rear connecting lines are rusted and needs to be replaced with left and right rear wheel cylinder. Is that something I need to get done right away or can I wait. They are charging $461 for the job. Should I bring...

Auto repair [ 1 Answers ]

Need to do it myself, changing brakes on '97, 2500 chevy truck. How big is the job

Auto repair [ 0 Answers ]

I am looking for the timing specs for a 2001 Dawoo Lagana. Repair manuals are not readily available. A "mechanic" changing the water pump moved the crank shaft pulley and messed up the timing. This is my daughter's vehicle. She is a college student with three children and a very limited income....

Auto repair [ 1 Answers ]

Yes, I have a 1992 Lincoln Continental with a 3.8 L injected V6. The problem I'm having is the transmission shifts good but slow and only if I accelerate it will shift smoothly into next gear. Do I have a exhaust problem or vacuum loss at the transmission. ...

Auto Repair [ 2 Answers ]

God Bless You all, Merry Christmas and Happy New Year; If I don't chat with you all before the month is over with. Don't let nothing keep you from serving GOD.My Queastion, I have a 1999, 300m, which is out of timing, because of the belt teeth coming off. How do I set it?

View more questions Search