 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troy bilt super bronco
On my mower the steering wheel just keeps turning and the wheels don't turn. From reading other posts it looks like I may need to replace the hex flange bearing, but I cannot get the stupid nut and pinion gear off to do so.. please and help is greatly appreciated
|
||||
|
||||
|
Hi,
The not is nothing but a common not, usually 7/16". Baring that you can remove the deck, raist the machine, pry off the cap and drop the entire steering shaft down out through the bottom. Seems to a #941-0656A. Peace, Clarke PS There is a silicon bronze variety, also. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...
Where can I get a wiring diagram for a 2006 model super bronco troybilt mower?
I have a model 13AT609G766 Super Bronco with a 21.0hpv twin it will not start, I had it running and when I pushed the lever to start the mower blades it died now it won't start. Can anyone help me, it will start if I spray starting fluid on the air filter but it dies after it burns off the starting...
Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.
View more questions Search
|
