Ask Experts Questions for FREE Help !
Ask
    lorre's Avatar
    lorre Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 20, 2012, 01:15 PM
    Kenmore elite smartheat quiet pak 9 manual?
    I took the lint trap apart to clean it there were two wires attached from dryer to lint trap they fell inside the dryer I am unable to reach them easily are they important? What r they used for? Everything seems to be working all right
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 21, 2012, 01:02 PM
    I cannot see how the dryer is working, but I recommend tearing the dryer down and cleaning it right and then attaching the wires.
    lorre's Avatar
    lorre Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 22, 2012, 01:39 PM
    These wires are connected to the lint trap what would they be for/
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Mar 22, 2012, 10:47 PM
    I have no idea. They are on none of my schematics.
    Karina75's Avatar
    Karina75 Posts: 2, Reputation: 1
    New Member
    		  
    #5

    May 21, 2012, 03:25 PM
    My dryer status stays on wet and of course the clothes takes like 4 hours to be dry.what van I ?
    krodgers9961's Avatar
    krodgers9961 Posts: 1, Reputation: 1
    New Member
    		  
    #6

    Jul 13, 2012, 07:06 AM
    I believe those wires are for the sensor that tells when the clothes are dry
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #7

    Jul 13, 2012, 07:53 AM
    There are two wires going to a sensor where the lint trap is located. I found a picture in one of these manuals: https://dl.dropbox.com/u/8010163/Ken...%20Manuals.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to turn on a kenmore elite smart quiet pak washer? [ 0 Answers ]

How do you turn on a kenmore elite smart quiet pak 9 washer. I unplugged it ,now its won't turn on at all. What do I do?

Kenmore elite smartheat quiet pak dryer beeps 3 time and won't start.. [ 3 Answers ]

I have a Kenmore Elite smartheat quiet pak dryer. Model # 110.85866400. The problem is when I push the start button it beeps 3 times and the display flashes PF... and does not start..?. We have replaced the control board and still... NOTHING!. If anyone could help me... I would greatly appreciate...

Kenmore Elite Quiet Pak Washing machine [ 1 Answers ]

Won't switch to next cycles, what part would I need to buy? Won't stop filling at small load, will fill up all the way? What part do I need to fix this?

View more questions Search