Ask Experts Questions for FREE Help !
Ask
    dano_4545's Avatar
    dano_4545 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2012, 03:29 PM
    Problem with my furnace
    What does pressure switch open with inducer on mean?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Feb 21, 2012, 10:26 AM
    Explain what the problem is that you are having. Give model number and maker and if you have ac.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace problem [ 2 Answers ]

Furnace operates fine except during cycle it will shut down then come back on to complete cycle. Could this be the blower relay or something else?

Having problem with my furnace [ 1 Answers ]

I have a Goodman Gas Furnace and the light blinks 3 times and says the pressure switch stuck open. What do I need to do?

Furnace problem [ 1 Answers ]

Hi got a goodmangmp075-3 furnanc it comes on blower motor working but the heat sensor is not turning red what should I do

Stat problem or furnace problem? [ 1 Answers ]

Need help. Not sure if having problem with stat or furnace. Stat was programmed to 68, and on "Auto", but furnace kept running past 79 and non-stop. I turned off the stat but it still heated up till the circuit was shut off. I left it off for at least an hour then clicked it back on. This solved...

Problem with furnace [ 3 Answers ]

Can anyone suggest what's the possible problem with the furnace - it makes a loud clanging noise when the heat first come on and stop right after that.

View more questions Search