Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need replacement switch for Hunter Ceiling fan
[ 2 Answers ]
I went to Lowe's where I originally purchased the Hunter Ceiling Fan, they had two switches, one was a 4 wire and one was an 8 wire. The one from my fan happens to be a 4 wire, I installed the switch carefully replacing each wire in the corresponding slot as was on the original one. Once...
Fan switch on hunter ceiling fan model #20537 not working.
[ 1 Answers ]
The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1
Trying to install a Lutron Maestro Fan/Light dimmer switch with a CD52 ceiling fan
[ 2 Answers ]
Hey everyone, I'm trying to find the wiring diagram for my ceiling fan but I'm not having any luck, best I could find is this forum. I've got the lutron MA-LFQ-3 kit which has a fan control canopy module and a master/slave light/fan dimming combo. I have the fan apart and it has a molex...
Hunter ceiling fan Switch
[ 2 Answers ]
How do I disconnect the pull chain fan switch and wire it together since it has a remote switch on the wall. At one time it worked however, I think there always was a short in the pull chain switch. Can this be bypassed? Thanks.
Hunter ceiling fan switch
[ 1 Answers ]
I just moved into a place with a hunter ceiling fan/light. At first the wall switch seemed to do something (there is no remote and there are no pull chains), although it seemed random to me. Now the wall switch does nothing. And without a remote or pull chain--nothing. Any advice to get that fan... View more questions Search
|