Check out some similar questions!
Bathroom Wall Tile - HELP!
[ 6 Answers ]
Uh oh! My first attempt at putting tile on a bathroom wall and I may have a problem. Here is the story. I installed Hardibacker board around the tub and green board in the rest of the bath. I taped the seams and used joint compound, then sanded (several times). It looked so good that I taped...
Removing Ceramic Tile from concrete slab
[ 2 Answers ]
I am in th process of removing ceramic tile from my back porch. We are having a pool installed and need the slab scraped clean so they can float it install acrylic deck. I was told by the contractor that the surface needed to be as smooth as possible. Removing the tile was not difficult, I...
Grout Tile On Concrete
[ 1 Answers ]
Hello I Have Recently Removed Ceramic Tile From A Concrete Floor And Am Left With A Huge Mess Of Grout Absolutely Stuck To The Concrete. I Can No Longer Physically Scrape It... how Can I Remove It Without Damaging The Concrete Floor? I Want To Put Hardwood On It And Need The Surface To Be As...
Removing Hardset Tile Mastic from Concrete Floor
[ 1 Answers ]
I need to remove a hardset ( not glue type) mastic from a large area of concrete floor. The mastic is almost as hard as the concrete and must be ground down in order to lay carpet. I am currently using a floor belt sander with hardest grade paper. It's moving at just about a snails pace. Is...
Glue on subfloor from stick on tile
[ 3 Answers ]
I am peeling up the old peel~n~stick tile from our bathroom floor. There is bare wood sub-floor underneath. The glue left is super sticky. I was planning on priming the floor and then laying new peel~n~stick tile. (Its a temporary fix until we have the $ to completely gut the bathroom and... View more questions Search
Add your answer here.
|