Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Coleman furnace problem
[ 5 Answers ]
I have a customer with a DLAS075 furnace. It takes way too long for it to heat up enough to close the fan switch. I am leaning toward the booster assembly but I am not sure. My thought is that the burner is not getting enough air to make the fire hot enough. The gas pressure is correct and nothing...
Coleman Furnace
[ 1 Answers ]
I have a Coleman Furnace in my mobil home and it keeps shutting off and won't hold a temperature. I have had a furnace company out and they replaced a gas valve but it did not help. To get the furnace to start back up I have to turn the thermostat off and then back on. It will run for a while the I...
Coleman Furnace
[ 2 Answers ]
Our furnace is kicking on and off. Then it'll kick, but not go further to turn on the blower and heat? Do you think control issue or booster assembly>
Coleman gas furnace
[ 1 Answers ]
I was having problems with my gas furnace. I replaced the ignitor which failed but it seems the ignition control may be locked out. Can they be unlocked or do they have to be replaced?I notice there is no power coming out of the ignition module to fire the ignitor. Any thoughts would be...
Coleman Furnace
[ 1 Answers ]
Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with... View more questions Search
|