Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace shower Plumbing Valve assembly shower head 2 knobs
[ 3 Answers ]
In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...
Shower valve
[ 1 Answers ]
I have a Moentrol single lever shower valve and only hot water is working. No cold water. The valve is 19 years old. What can be done short of replacing the valve?
Replaced Shower valve problem
[ 2 Answers ]
This SHOULD have been simple... I replaced HOT and COLD valves and the DIVERTER on 2 showers. They were old and needed to go. Great care was taken to match and get the proper replacements. The COLD on each shower works well. The HOT leaks out the center post a bit in each shower. The...
Symmons Temptrol Shower/Tub Handle -
[ 1 Answers ]
I printed off the internet the part breakdwon to my tub/shower one-dial Symmons Temtrol kit as I am trying to stop a slow leak out oif the tub faucet. I removed the screw and cap - and I can't get the handle off - is it hyst suppoosed to pull off once the screw is removed? That is how the...
Shower valve
[ 3 Answers ]
Tom, how are you doing? Can you explain all of the differences to me between a thermostatic water valve and a pressure regulated valve, and which one would be the best to use for my new shower for temp. control. I want to avoid those WOWs when someone turns on water somewhere else in the house.... View more questions Search
|