Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Ceiling Fan - Light Comes On By Itself
[ 15 Answers ]
Just installed a Hampton Bay ceiling fan with the remote control for the fan and the light. Old house and I it's my first time installing a fan. Pretty proud and works pretty well. O.K. just a little wobble. After a while of operation, the light comes on without anyone touching the remote. ...
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Hampton Bay Ceiling Fan/Light
[ 1 Answers ]
We have a wireless Hampton Bay ceiling fan and light with a built in remote receiver. We can still operate the fan with the remote but the lights don't work. The universal remote has one wire for the fan and one wire for the lights but the original system has numerous wires going to the motor. Is...
Hampton Bay Ceiling Fan light
[ 6 Answers ]
Can anyone tell me where I can find a replacement bulb for a ceiling fan I purchased at Home Depot a (hampton bay). The bulb is a mini spiral fluorescent with the writing on the side being--PLS13 Warm White, it has 4 pins. And is the push in type. Thanks
Hampton Bay ceiling fan/light
[ 3 Answers ]
I had to take the fan/light down and in doing so don't remember wiring senario that makes the wall switch work the light portion. There are 4 wires coming down from the ceiling of which 2 are still connected. The wiring for the light is still in tact and marked, neutral, light etc. What wires do I... View more questions Search
|