Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore washing machine spin cycle
[ 2 Answers ]
My Kenmore washer will go through the wash cylce but when it reaches the spin cycle the water will drain out but will not spin out. I did replace the motor isolation cupling, but that did not take care of the problem. I'm thinking that the control magnet could be the culprit. Any thoughts?? LAJ
Question about washing machine fill cycle
[ 1 Answers ]
I have a question about how the washing machine works. When the washer is filling with water and someone in the house turns on a faucet, I see a big decrease in the flow of water into the washer. I know the cycles are on a timer, so does that mean that the water in the washer will be less when it...
Washing Machine will not finish cycle
[ 1 Answers ]
I have an Inglis Citation washer (15 years or so) that stops midcycle. The 15 minute cycle stops at the 6 minute mark but the timer keeps counting down to the rinse cycle. The rinse cycle does kick in and spins to completion. I had the timer rebuilt but that was a waste of money. Any help would...
Washing cycle will not complete without...
[ 1 Answers ]
My washer stops after the agitation cycle is complete. I find my clothes standing in water. If I open the lid and close it, it will start to drain and the cycle will compete as if it had never stopped at all. It seems to me that the lid switch is the problem. Sometimes when the cycle has stopped, I...
Completing the square! HELP!
[ 2 Answers ]
Hey all, were doing quadratics and completing the square and my teacher gave us about 30 problems to work on but I'm really stumped on half of them. Im going to list 3 problems that are similar in how they are setup, can you show me how to solve them? I think I can figure out how to do the rest... View more questions Search
|