Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gas furnace
[ 2 Answers ]
For the past 2 nights my furnace has been blowing out cold air. I have a furnace which is equipped with an ignition device which automatically lights the piolet. I did everything from cutting off the gas valve and power to furnace. When I restarted everything back up, the furnace came on but no air...
Goodman Gas Furnace
[ 3 Answers ]
I have a Goodman Gas Furnace, the hot surface ignite will not come on nor the flame sensor. I have tried everything and I am fresh out of ideas. Could you please help me on this. Thanks
York gas furnace problem
[ 2 Answers ]
My furnace has a intermmitent problem. When it quits the fault code is open limit. They all are closed. I can get it to work by moving the wires at the control board connector. The connections appear to be OK. I looked at the rear of the board and did not see any bad solder joints or cracks....
Gas furnace
[ 14 Answers ]
Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks. View more questions Search
|