Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rheem Model 81V52D Water Heater
[ 20 Answers ]
My water heater seemed to be running out of hot water sooner that normal. Since the elements have never been replaced , I thought this might be the problem. So I shut off the power, cut off the water supply to the heater and shut off the valve from the heater to the house. I connected a hose the...
New blower motor - Rheem furnace model # rgda-07ea-cr, 75,000 BTU.
[ 9 Answers ]
Hi - I have a 1987/88 Rheem furnace model # rgda-07ea-cr, 75,000 BTU, natural gas. The blower motor is starting to get noisy and vibrate. I pulled it out and took it apart and looked at the bushing and shaft and see the shaft is wore, so thinking there is not use just replacing the bushing. ...
Rheem hot water heater model# 81V52D
[ 1 Answers ]
This morning there was no hot water and I checked the circuit beaker and it had been trip to off position. I turned the beaker to on position, smoke started coming from where the Main electric wire that runs down into the top of the water heater, then the water heater trip the beaker back to the...
Fan limit settings for a RHEEM Gas Furnace Model 3214-100FB
[ 1 Answers ]
I have a RHEEM Gas Furnace Model 3214-100FB. My problem is that when the heat shuts off the fan keeps moving until all the hot air is removed from the vents. The fan then continues to blow until the house becomes cool again, which then causes the heat to have to come back on. What are the proper...
Ruud Heat Pump - Model RCBA-4882GG21
[ 1 Answers ]
Where are the filters and how do you get to them to clean them View more questions Search
|