Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & stratton 12.5
[ 8 Answers ]
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
Briggs & Stratton cranks but does not start
[ 11 Answers ]
I have an MTD Yard Machine powered by a B&S 12.5 hp code 9311064E type 0154-01. The engine cranks slowly and in spurts approximating the four cycles. When I remove the spark plug the engine spins normally. I had the battery checked at a battery shop and it was pronounced fine after a load test. A...
Briggs&Stratton engine 121602
[ 3 Answers ]
OK, Dh and I are havig a slight disgreement about the mower. It is a Murray, sold under the Scotts brand in 2000, with a briggs and stratton 6.5 hp engine number 121602. Now, a cable broke, the one from the handle that kills it when you let go, and it sat outside for a month while we got the...
Briggs &stratton 15 hp.
[ 1 Answers ]
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...
Briggs & stratton 16hp
[ 1 Answers ]
Hi, I have a Cub Cadet which had a 16hp BS motor with points. It went bad so I found another 16hp BS that does not have points, it has the magnetron ignition. I am having trouble getting it to fire, is there something that I need to change to the wiring to make it fire. The magnetron engine came... View more questions Search
|